After changing old oil to new HMMF oil.
Wait for 20min or until oil cool down.
Then,
here, pushing the accelerator pedal very hard, To avaid accident, set a Tire Chock Block so that car will not move.
Lets Start Engine.
1. Set Drive, Push Break pedal hard and push the accelerator pedal very hard for 3Sec.
2, Set Nutral, Push Break pedal and Keep rev meter 3000rev. for 20Sec.
3, Set Drive, Push Break pedal hard and push the accelerator pedal very hard for 3Sec.
4, Set Nutral, Push Break pedal and Keep rev meter 3000rev. for 20Sec.
5, Set Reverse, Push Break pedal hard and push the accelerator pedal very hard for 3Sec.
6, Set Nutral, Push Break pedal and Keep rev meter 3000rev. for 20Sec.
7, Stop Engine and Cool down for 20min.
Changeing oil and this adjustment is one set.
If you car has a bad judder, I recommend do this 2 sets.
After this set. Lets CVT reset, here is how.
Start engine.
1. Warming engine up until radiator cooling-fan start working.
2. Head lights on. other electric devices such as Air control, radio and so on, turn switch off.
3. Drive 60km and off the accelerator pedal for more than 5 sec.
THats all about To fix Honda CVT judder problem.
This time, My fit was very very little judder and one set is enough. Now the judder is gone.
Driving very smooth, No need change ATF oil for 2-3 years.
